There was a recent mailing from the FAA to our customers who previously purchased Removable Cessna Jump Seats. Should you receive this letter please visit this link for more information.
More
OUR PRODUCTs
206/207/210 Rudder Bar – Right Hand
P/N: AD1260558-2
Price: $2,272.00 each
Eligible On: Cessna 206, U206G, TU206G, 206H, T206H, 207A, T207A, 210-5, and 210-5A Series Aircraft
STC: N/A
FAA/PMA: Supplement 35
Weight: 1.8 oz.
Material: 4130 N, powder coated black
Purpose: Direct replacement for Cessna P/N's 1260558-2 and 1260418-4.
Installation: Same as original stock part.
Misc. Information: Reinforcement straps installed on pedal tubes.
More
Brake Disc Spacer for Cleveland Wheel and Brake Kits
P/N: 2609-DS
Price: $43.00 each
Eligible On: Cleveland 3 and 6 Bolt Wheels
STC: N/A
FAA/PMA: N/A
Weight: 2 oz.
Material: 6061 T6 Aluminum
Installation: Deflate tire, remove brake disk, insert spacer between disc and wheel, install 1/8" longer bolts, then torque to wheel manufacturer specs.
Purpose: Spaces brake disc 1/8" away from oversize tires to prevent brake caliper from rubbing.
Misc. Information: For Cleveland Kits 199-62 and 199-62A use 2609-DS-2 (same price).
More
C170/180 Ski Attach Kit
P/N: 3168-180
Price: $540.00 per kit
Eligible On: All Cessna 170 Series Aircraft as well as early model Cessna 180 Series Aircraft prior to S/N 51313.
STC: SA02360AK
FAA/PMA: Supplement 29
Material: 304 SS
Purpose: Used for ski rigging installation.
Installation: Brackets are bolted on. See copy of installation instructions here: INSTALLATION INSTRUCTIONS
Misc. Information: Commonly used for straight wheel ski replacement installations under FAA field approval. Please contact Airglas to...
More
C180 V-Brace
P/N: 180-VBE
Price: $740.00 each
Eligible On: Cessna 180, 180A, and 180B with serial numbers 604, 613, and 3000 thru 50661.
STC: SA02319AK-D
FAA/PMA: Supplement 5
Weight: 2 lbs., 3.7 oz.
Material: Stainless steel, powder coated black.
Purpose: Windshield V-Brace adds rigidity to the airframe when on floats or rough terrain.
Installation: Please see Installation Instructions.
More
C180/185 Ski Attach Kit
P/N: 3168-185
Price: $540.00 per kit
Eligible On: Late model Cessna 180 Series Aircraft with S/N# 51313 and on as well as all Cessna 185 Series Aircraft.
STC: SA02360AK (covers C180 only)
FAA/PMA:Supplement 29 (covers C180 only)
Material: 304 SS
Purpose: Used for ski rigging installation.
Installation: Brackets are bolted on. See copy of installation instructions here: INSTALLATION INSTRUCTIONS
Misc. Information: Commonly used for straight wheel ski replacement installations under FAA fi...
More
C185 Strap
P/N: AD0750166-3HD
Price: $102.50 each
Eligible On: Cessna 185, 185A, 185B, 185C, 185D, 185E, A185E, and A185F Series Aircraft
STC: N/A
FAA/PMA: PMA Supplement No. 74
Weight: .3 oz.
Material: .0595" thick Stainless Steel
Purpose: Heavy duty replacement for Cessna P/N 0750166-3 used in Cessna Bracket Assemblies 0750166-4, 0750166-7, and 0750613-1.
Installation: Installs with 2 Monel rivets.
Misc. Information: Part is fabricated using thicker stainless steel than OEM part for longer life ...
More
Cabane Vee Weld On Attach Fittings
P/N: 3166-2AF
Price: $223.00 per kit
Eligible On: PA-12 and PA-14 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 4.1 oz.
Material: 4130N
Purpose: Needed to install a PA-18 Cabane Vee on a PA-12 or PA-14 fuselage equipped with PA-18 style landing gear.
Installation: Installed per Roger Borer Drawing #1000-1 from STC SA148AL. His daughter Karen maintains his STC’s. She can be reached at (907) 317-7732.
More
Cessna Bellcrank Assembly for Seat Back Adjustment
P/N: AD0514030-4HD
Price: $225.50 each
Eligible On: Please see AML
STC: N/A
FAA/PMA: Approved
Weight: 2.8 oz.
Material: 4130N
Purpose: Seat back adjustment.
Installation: Per Cessna service manual.
Misc. Information: This part has a thicker wall than OEM to prevent roll pin tear out.
More
Cessna Cabin Step (Late Models)
P/N: AD0711710-1HD (left hand) and AD0711710-2HD (right hand)
Price: $823.50 each
Eligible On: Cessna 180H thru 180K and A185E thru A185F Series Aircraft
STC: N/A
FAA/PMA: Pending Approval
Weight: 15.7 oz.
Material: 4130N, powder coated white
Purpose: Replacement for Cessna P/N's 0711710-1 and 0711710-2 used in Cessna step assemblies P/N 0711710-5 and P/N 0711710-6.
Installation: Bolt and rivet support to fuselage using fasteners as OEM part. Install your existing P/N 1510041-2 (left han...
More
Cessna Retainer, Control Cable
P/N: AD0750614-5
Price: $90.75 each
Eligible On: Direct replacement for Cessna P/N 0750614-5
STC: N/A
FAA/PMA: N/A
Material: Cadmium Plated 4130
Purpose: Mixture and/or throttle assembly
Installation: Same as original part
More
Cessna Retainer, Control Cable
P/N: AD1650042-4
Price: $158.75 each
Eligible On: Direct replacement for Cessna P/N 1650042-4
STC: N/A
FAA/PMA: N/A
Material: Cadmium Plated 4130
Purpose: Mixture and/or throttle assembly
Installation: Same as original part
More
Cessna Retainer, Control Cable
P/N: AD0750614-3
Price: $158.75 each
Eligible On: Direct replacement for Cessna P/N 0750614-3
STC: N/A
FAA/PMA: N/A
Material: Cadmium Plated 4130
Purpose: Mixture and/or throttle assembly
Installation: Same as original part
More
Cessna Retainer, Control Cable
P/N: AD1650042-3
Price: $158.75 each
Eligible On: Direct replacement for Cessna P/N 1650042-3
STC: N/A
FAA/PMA: N/A
Material: Cadmium Plated 4130
Purpose: Mixture and/or throttle assembly
Installation: Same as original part
More
Cessna Shroud
P/N: AD1250251-17
Price: $154.00 each
Eligible On: Cessna 210-5 (205), 210-5A (205A), 206, U206 thru U206F, P206 thru P206E
STC: N/A
FAA/PMA: Supplement 48
Material: Stainless Steel
Purpose: Direct replacement for Cessna P/N 1250251-17
Installation: Installs with screws, please consult Cessna Service Manual for further instruction.
More
Cessna Stabilizer Trim Jack Screw Boot
P/N: U0712500-18
Price: $64.75 each
Eligible On: Cessna 180, 182 thru 182D, and 185 Series Aircraft
STC: N/A
PMA: Supplement 41
Purpose: Direct replacement for Cessna P/N 0712500-18. Covers and prevents debris from interfering with jack screws.
Installation: Installed when jack screws are removed for repair.
More
DHC-2 Folding Center Row Seat
P/N: 3180
Price: $4,585.00 each
Eligible On: DHC-2 MK.1
STC: SA4613NM
FAA/PMA: Supplement 1
Purpose: To allow for a 3 person middle row bench seat.
Installation: Seat snaps in using standard attach brackets. Fits into original seat bases. Must have seat belt/cargo anchors installed in floor in accordance with STC SA3617NM.
Misc. Information: Bench can be split to allow for a single seat at times. You can order the bench with a single seat on the left or right. You can also choose to hav...
More
DHC-2 Tiller Bar for Landplane
P/N: AD-C2UT479A
Price: $225.00 each
Eligible On: DHC-2 Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 8 oz.
Material: 6061 T6
Purpose: Allows tailwheel assembly to be connected to rudder cables.
Installation: Same as original installation.
Misc. Information: Powder coated gloss white. Custom fabricated per customer request. Drawing on file at F. Atlee Dodge.
More
DHC-2 Tiller Bar for Seaplane
P/N: AD-C2UT479A-4930
Price: $275.00 each
Eligible On: DHC-2 Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 13 oz.
Material: 6061 T6
Purpose: Connects air rudder to water rudder.
Installation: Same as original installation.
Misc. Information: Powder coated gloss white. Custom fabricated per customer request. Drawing on file at F. Atlee Dodge.
More
DHC-3 Hydraulic Tank
P/N: ADC3S23-15
Price: $1,065.00 each
Eligible On: DHC-3
STC: N/A
FAA/PMA: N/A
Weight: 22 oz.
Material: 6061 T6 Aluminum
Purpose: Used for wheel ski installation on DHC-3 only.
Installation: To be installed at the same time as skis.
Misc. Information: Custom fabricated as per customer request. Drawing on file at F. Atlee Dodge.
More
Mandatory Service Bulletin Jump Seat Kit
P/N: 3187-MSBKIT (full kit for 1 pair of seats) and/or 3187-MSBKIT2 (half kit for only 1 seat)
Price: $295.00 per full kit, $147.50 per half kit.
Eligible On: C170, C172, C175, C180, C182, and C185 Series Aircraft
STC: SA02008AK
FAA/PMA: Supplement 1
Purpose: To ensure existing jump seats comply with MSB 3187-I-01 rev A.
Full Kit Includes:
Copy of Mandatory Service Bulletin (MSB 3187-I-01 rev A)
Copy of Airplane Flight Manual Supplement (AFMS 3187)
Copy of Instruction for Continued ...
More
Maule Weld on Float Fittings
P/N: 3285-1
Price: $945.00 per pair
Eligible On: Maule M-5-180C, M-6-235, MX-7-180, MX-7-235 Series Aircraft
STC: SA02256AK
FAA/PMA: Supplement 57
Weight: 3.1 lbs. per pair
Material: 4130N
Purpose: Durable direct replacement for the original clamp on float fittings used on Maule Aircraft equipped with EDO 89-2000 floats.
Installation: Please see Installation Instructions.
More
NAS Bushing
P/N: AD382-2
Price: $76.50
Eligible On: Cessna 180 and 185
STC: N/A
FAA/PMA: Approved
Material: 4130
Purpose: Direct replacement for Cessna P/N NAS382-2
Installation: Same as original part
Misc. Info: Rudder/Tailwheel Steering/120/140 Aileron
More
Observation Window and Skylight
P/N: 8049
Price: $212.50 per kit
Eligible On: Piper PA-18 Aircraft Series
STC: SA02498AK
FAA/PMA: Pending Approval
Material: Steel
Purpose: Used to install L21 style windows and extended skylight.
Installation: Installation includes welding. Click here to view Installation Instructions
Misc. Information: Agricultural models must have non-agricultural upper fuselage framing installed under other FAA approved means. Windows can be purchased at Univair. STC SA02498AK sold separately for an ...
More
Our Products
PA-12 Firewall Blanket
P/N: AD12-FW-BLKT
Price: $225.50 each
Eligible On: PA-12 and PA-14 Aircraft Series
STC: N/A
FAA/PMA: N/A
Weight: 13 oz.
Material: Fabric is Naugahyde with fire block foam backing that self extinguishes and is also gas, grease, and oil resistant. Naugahyde material meets MUSS-302 flammability requirements. Foam backing meets UL-91 HF-1 flammability requirements. Fabric rated to -40 below.
Purpose: Insulates firewall to reduce heat transfer and noise in the cabin.
Installation: Same as sto...
More
PA-12 Weld On Aft Float Fittings
P/N: 3143
Price: $885.00 per pair
Eligible On: PA-12 and PA-14 Aircraft Series
STC: SA00132SE
FAA/PMA: Supplement 11
Weight: 2 lbs. per pair
Material: 4130N Steel
Purpose: Replaces clamp on style fittings. Provides cleaner and stronger installation.
Installation: Normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times.
Misc. Information: Part includes swivel block for strut and swivel wire pull tab for flying wires.
More
PA-18 Cabane Vee
P/N: 3166-1
Price: $465.00 each
Eligible On: PA-18 Series Aircraft
STC: SA4618NM
FAA/PMA: Supplement 1
Weight: 2 lbs.
Material: 4130N
Purpose: Heavy duty replacement for Piper P/N 30602-010 and 30602-007.
Installation: Same as stock installation, please reference Piper Owners Manual.
More
PA-18 Cowl Channel Attach Kit
P/N: 18BC-CCAK
Price: $151.00
Eligible On: PA-18
STC: N/A
FAA/PMA: N/A
Weight: 3.5 oz.
Material: 304 Stainless Steel
Purpose: Used to attach cowl channels to boot cowl.
Installation: F. Atlee Dodge has added a back up angle to each location that is installed on the AFT side of the firewall. They are riveted or bolted onto the boot cowl skins to prevent the firewall from cracking. Kit includes 2 upper angles, 2 lower angles, and 2 lower back up angles. Click here for diagram: Cowl Channel...
More
PA-18 Firewall Blanket
P/N: AD18-FW-BLKT
Price: $225.50 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 13 oz.
Material: Fabric is Naugahyde with fire block foam backing that self extinguishes and is also gas, grease, and oil resistant. Naugahyde material meets MUSS-302 flammability requirements. Foam backing meets UL-91 HF-1 flammability requirements. Fabric rated to -40 below.
Purpose: Insulates firewall to reduce heat transfer and noise in the cabin.
Installation: Same as stock blanket...
More
PA-18 Front Exhaust Stack
P/N: AD12457-012HD
Price: $995.00 each
Eligible On: PA-18 125 thru 150 HP
STC: N/A
FAA/PMA: Pending Approval
Weight: 4.35 lbs.
Material: 321 Stainless Steel
Purpose: Heavy duty front exhaust crossover stack for Piper PA-18 series with Lycoming engines.
Installation: Same as OEM.
Misc. Information: Manufactured with heavier wall tubing, thicker flanges, and extra doublers to prevent cracking. Available with 180 HP extension tubes installed. ...
More
PA-18 Lift Strut Reinforcment Bracket
P/N: 3192-18
Price: $141.50 each
Eligible On: PA-18 Series Aircraft
STC: SA02026AK
FAA/PMA: Supplement 9
Weight: 4 oz.
Material: 4130N Steel
Purpose: Provides additional strength to the lift strut attach brackets and helps prevent damage from high winds when aircraft is tied down outdoors.
Installation: Please see Installation Instructions.
Misc. Information: Powder coated white. If lift strut fitting is bent or has elongated holes it will need to be replaced.
More
PA-18 Rear Exhaust Stack
P/N: AD12457-013HD
Price: $1,040.00
Eligible On: Piper PA-18 125 thru 150 HP
STC: N/A
FAA/PMA: Pending Approval
Weight: 4.7 lbs.
Material: 321 Stainless Steel
Purpose: Heavy duty rear exhaust crossover stack for Piper PA-18 series with Lycoming engines.
Installation: Same as OEM.
Misc. Information: Manufactured with heavier wall tubing, thicker flanges, and extra doublers to prevent cracking. Available with 180 HP extension tubes installed. ...
More
PA-18 Support Rod
P/N: 3241-16
Price: $63.00 each
Eligible On: PA-18 Series Aircraft
STC: SA02273AK
FAA/PMA: Supplement 2
Material: 304 Stainless Steel
Purpose: Tailpipe support rod for PA-18 Hot Rod Muffler.
Installation: Replaces Piper P/N 13003-00.
Misc. Information: For use with PA-18 Hot Rod Muffler (P/N 3241-HR) and 3" clamps without pin (P/N AD-C-3000). 1 rod is needed per exhaust.
More
PA-18 Titanium Boot Cowl Assembly
P/N: 18-BC-T
Price: $2,585.00 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 8.875 lbs.
Material: Titanium
Misc. Information: F. Atlee Dodge boot cowls are fabricated using our FAA/PMA approved firewall. We incorporate reinforcements at the cowl channel attach points to prevent cracking. Cowl channel kit is installed. Side to top seams are left un-riveted to allow for adjustable fit to fuselage.
More
PA-18 Titanium Hot Rod Muffler
P/N: 3241-HRT
Price: $2,785.00 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2.8 lbs. for muffler (3.25 lbs. lighter than P/N 3241-HR and 3.4 lbs. lighter than P/N 3241)
Material: Titanium
Purpose: Fabricated from titanium for reduced weight. Muffler is coreless with a larger tailpipe diameter for increased horsepower.
Installation: Installation requires cutting the lower cowl tailpipe opening to clear larger tailpipe.
Misc. Information: Purchase includes 2 piece...
More
PA-18 Weld On Aft Float Fittings
P/N: 3143-1
Price: $585.00 per pair
Eligible On: J3, PA-11, PA-18, and PA-19 Aircraft Series
STC: SA4615NM
FAA/PMA: Supplement 1
Weight: 2 lbs. per pair
Material: 4130N Steel
Purpose: Replaces clamp on style fittings. Provides cleaner and stronger installation.
Installation: Normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times.
Misc. Information: Part includes swivel block for strut and swivel wire pull tab for fl...
More
PA-18-150 Tailwire Support
P/N: AD60764-02
Price: $75.00 each
Eligible On: PA-18-150 with serial numbers 18-8602 thru 18-8109013, 1809001 thru 1809057, and 1809060
STC: N/A
FAA/PMA: N/A
Material: .062 4130N
Purpose: To comply with Piper Service Bulletin 706B and Airworthy Directive 81-06-08
Installation: Please see SB 706B for installation instructions.
Misc. Information: Part fabricated in accordance with Piper Service Bulletin 706B
More
PA-18-180 Carburetor Heat Box
P/N: AD15005-180
Price: $1,785.00 each
Eligible On: Piper PA-18 with 180HP
STC: N/A
FAA/PMA: N/A
Weight: 2 lbs., 13oz.
Material: Stainless Steel
Misc. Information: Custom fabricated upon request.
More
PA-18-180HP Front and Rear Exhaust Stacks
P/N: AD12457-012HD-180 (front) and AD12457-013HD -180 (rear)
Price: $1,267.75 each (front) and $1,325.00 each (rear)
Eligible On: PA-18 with 180 HP conversions
STC: N/A
FAA/PMA: N/A
Weight: 5 lbs.
Material: 321 Stainless Steel
Purpose: Heavy duty front exhaust crossover stack for Piper PA-18 series with 180 HP Lycoming engines.
Installation: Same as OEM stacks.
Misc. Information: These heavy duty stacks incorporate a heavier wall thickness material than the OEM stacks. Doublers are inst...
More
Piper Aircraft Tie Down Bracket – Titanium
P/N: 3197-T
Price: $228.50 each, normally sold in pairs
Eligible On: PA-12 and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 10 oz. each
Material: Titanium with aluminum spacers.
Purpose: To remove the tie down load from the front lift strut U-channel that is attached to the front spar.
Installation: Recommended at time of wing covering.
More
Piper Cargo Tie Down Hooks
P/N: 3234-10
Price: $33.00 each
Eligible On: J3, PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2 oz.
Material: 4130N
Purpose: Attachment for cargo straps.
Installation: Weld-on installation.
Misc. Information: Used with Cargo Net P/N 3234
More
Piper Cargo Tie Down Rings
P/N: 40340-20
Price: $18.25 each
Eligible On: J3, PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 2.5 oz.
Material: Steel
Purpose: Direct replacement for Piper P/N 07110069-1, 07110069-2, 07110069-5, and 07110069-6. Used with Piper Cargo Tie Down Bases P/N 40000-11.
Installation: Please see AC 43.13-2B, Chapter 12 for installation practices.
Misc. Information: Load rating of 4,000 lbs. for vertical loads, 2,000 lbs. for horizontal loads, and 3,000 lbs. for a 45 deg...
More
Piper Main Landing Gear Safety Cables – 3″ Extended Length
P/N: 3344 (PA-18) or 3344A (PA-12, PA-14)
Price: $232.00 per kit
Eligible On: PA-12, PA-14, and PA-18 Series Aircraft
STC: SA02190AK (covers PA-12 and PA-14) SA02189AK (covers PA-18)
FAA/PMA: Supplement 1
Weight: 2.9 lbs.
Material: Stainless steel plates and galvanized cables.
Purpose: Prevents main landing gear from collapsing should a landing gear component fail.
Installation: Please see Installation Instructions. It is recommended to use new AN hardware when installing new safety cabl...
More
Piper Main Landing Gear Safety Cables – 6″ Extended Length
P/N: 3344A-6X (PA-12) or 3344-6X (PA-18)
Price: $232.00 per kit
Eligible On: PA-12 and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Purpose: Prevents main landing gear from collapsing should a landing gear component fail.
Installation: Please see Installation Instructions. It is recommended to use new AN hardware when installing new safety cables due to bolt length.
Misc. Information: Custom fabricated lengths available upon request. Safety cables should always be replaced after a landing ...
More
Piper Main Landing Gear Safety Cables – Standard Length
P/N: 2089-12 (PA-12 and PA-14) or 2089-18 (J3, PA-11, PA-18, and PA-19)
Price: $232.00 per kit
Eligible On: J3, PA-11, PA-12, PA-14, PA-18, and PA-19 Series Aircraft
STC: SA4609NM (covers J3 and PA-11), SA4607NM (covers PA-12), SA505AL (covers PA-14), and SA4606NM (covers PA-18 and PA-19)
FAA/PMA: Please click this link to view all approvals.
Weight: 2.9 lbs.
Material: Stainless steel plates and galvanized cables.
Purpose: Prevents main landing gear from collapsing should a landing gear c...
More
Piper Main Landing Gear Safety Cables – Wide Body
P/N: 3344-4W
Price: $232.00 per kit
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: Stainless steel plates and galvanized cables.
Purpose: Prevents main landing gear from collapsing should a landing gear component fail.
Installation: Please see Installation Instructions. It is recommended to use new AN hardware when installing new safety cables due to bolt length. .
Misc. Information: Custom fabricated lengths available upon request. Safety cables should always be repl...
More
Piper Muffler
P/N: AD10308-003
Price: $885.00 each
Eligible On: PA-12, PA-14, PA-16, PA-22, and PA-25 (S/N 722 and up) Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: Stainless steel
Purpose: Exhaust system muffler.
Installation: Same as stock muffler installation.
Misc. Information: Supersedes P/N's 10308-000, 10308-003, 10308-00 and 10308-03. Repair station item only. Please send us your existing muffler via the carrier of your choice. Part cannot be sold without the existing muffler being sent in ...
More
Piper Weld On Front Shoulder Harness Attach Bracket
P/N: 3232W-1
Price $82.00 each
Eligible On: PA-12, PA-12S, PA-18, PA-18S, PA-19, and PA-19S Series Aircraft
STC: SA02488AK
FAA/PMA: Supplement 54
Weight: 5.4 oz.
Material: 4130N
Purpose: Attaches shoulder harness to fuselage frame.
Installation: Please see Installation Instructions.
Misc. Information: STC sold separately
More
Piper Weld On Rear Shoulder Harness Attach Bracket
P/N: 3232W-2
Price: $82.00 each
Eligible On: PA-12, PA-12S, PA-18, PA-18S, PA-19, and PA-19S Series Aircraft
STC: SA02488AK
FAA/PMA: Supplement 54
Weight: 5.4 oz.
Material: 4130N
Purpose: Attaches shoulder harness to fuselage frame.
Installation: Please see Installation Instructions.
Misc. Information: STC sold separately
More
Silver Ski Springs
P/N: 2097
Price: $212.50
Eligible On: Approved Model List
STC: SA4624NM
FAA/PMA: Supplement 1
Weight: 2.2 lbs.
Material: Cadmium Plated Steel
Purpose: Improves ski rigging tension in cold weather.
Installation: Installation instructions included with STC.
Misc. Information:
For ski equipped airplanes that have rigid welded tubular steel type main landing gear
VNE equal to 160 MPH or less
Maximum weight 2500 lbs.
16 1/2" long, 1 5/6" diameter
More