P/N: 12309-00 FWD/12314-00 Rear
Price: $190.50 FWD/$121.25 Rear
Eligible On: Piper PA-18
STC: N/A
FAA/PMA: N/A
Throttle Paneling
More
Uncategorized
PA-18 Tailpipe Extension
P/N: 3241-EXT
Price: $162.00 each
Eligible On: PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 1.15 lbs.
Material: 321 Stainless Steel
Purpose: Provides a 12 inch extension for the tailpipe to help keep belly of aircraft clean.
Installation: Installs with one clamp, which is included with purchase.
Misc. Information: Fits PA-18 standard tailpipes. Does not fit Hot Rod mufflers.
More
EDO 2000 Blade Brackets
P/N: AD88-W-076-1 (left hand) and AD88-W-076-2 (right hand)
Price: $75.50 each
Eligible On: Aircraft equipped with EDO 2000 floats.
STC: N/A
FAA/PMA: N/A
Weight: 4.1 oz.
Material: Aluminum
Purpose: Direct replacements for EDO PN's 88-W-076-1 and 88-W-076-2.
Installation: Same as original stock parts.
Misc. Information: Includes arm and opening for springs.
More
C206 Boarding Ladder
P/N: 3193
Price: $1,052.00 each
Eligible On: Cessna 206 Series Aircraft equipped with EDO 582-3430 floats.
STC: SA02088AK
FAA/PMA: Supplement 1
Material: Stainless Steel support tube with Aluminum rungs.
Purpose: Used for easier loading of aircraft through right hand AFT door when aircraft is on floats.
Installation: Bolts on.
Misc. Information: Support tube is telescoping to allow for installation variances and float movement while in service.
More
DHC-2 Sending Unit Gasket
P/N: DHC2-SU
Price: $27.25 each
Eligible On: DHC-2
STC: N/A
FAA/PMA: N/A
Weight: .1 oz.
Material: Cork
Purpose: Seals fuel quantity sending unit.
Installation: Same as original stock part.
Misc. Information: Part is .058" thick.
More
DHC-2 Inspection Cover Gasket
P/N: DHC2-IC
Price: $21.00 each
Eligible On: DHC-2
STC: N/A
FAA/PMA: N/A
Weight: .2 oz.
Material: Cork
Purpose: Seals fuel tank inspection covers.
Installation: Same as original stock part.
Misc. Information: Part is .060" thick.
More
EDO 89-2000 Float Splash Rail Kit
P/N: FSR-KIT
Price: $318.75 per kit
Eligible On: All aircraft equipped with EDO 89-2000 floats.
STC: N/A
FAA/PMA: N/A
Weight: 2 lb., 9.2 oz. per kit
Material: 6061 T6 Aluminum, powder coated silver.
Purpose: Used to prevent propeller erosion by reducing water splash from floats.
Installation: Rivets onto floats.
Misc. Information: Parts include 4 attach angles per side.
More
Piper Aircraft Tie Down Loop
P/N: 3218-1
Price: $63.00 each
Eligible On: Piper J3, J4, J5, PA-11, PA-12, PA-14, PA-16, PA-18, PA-19, PA-20, and PA-22 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 2.3 oz.
Material: 4130N, powder coated white
Purpose: Direct replacement for Piper P/N 12345-04.
Installation: Please see Installation Instructions.
Misc. Information: Please see our Engineering Design Approval for more information regarding this replacement part.
More
DHC-2 Boarding Ladder
P/N: ADC2FS3581ND (left hand) and ADC2FS3582ND (right hand)
Price: $705.50 each
Eligible On: DHC-2 Beaver
STC: N/A
PMA/FAA: N/A
Weight: 2 lbs., 3 oz.
Material: 4130N, powder coated white.
Purpose: Boarding ladder for Landplane.
Installation: Same as original stock part, bolt on installation.
More
Piper Main Landing Gear – 6″ Extended Length with 1 1/4 Axle
P/N: 3284-6X1 (left hand) and 3284-6X2 (right hand)
Price: $980.00 per side
Eligible On: Piper PA-12, PA-14, and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Material: 4130N Steel Tubing
Purpose: Heavy duty gear provides additional clearance for propeller on aircraft equipped with smaller tires or ski’s. Also allows for take off with lower air speed.
Misc. Information: Main Landing Gear can be powder coated white, black, or gray for an additional $110.00 per side. Gear includes bushings in...
More
Piper Main Landing Gear – Standard Length with 1 1/2 Axle
P/N: 3225-A1 (left hand) and 3225-A2 (right hand)
Price: $935.00 per side
Eligible On: J3, PA-11, PA-18, and PA-19 Series Aircraft
STC: N/A
FAA/PMA: Supplement 1
Weight: 8.4 lbs. per side
Material: 4130N Steel Tubing
Purpose: Heavy duty replacement for Piper P/N’s 00041-60/61, 10033-00/01, and 10033-051/06.
Installation: Same as stock landing gear.
Misc. Information: Main Landing Gear can be powder coated white, black, or gray for an additional $110.00 per side. Gear includes bushings i...
More
Piper Cabane Vee
P/N: 3166-2
Price: $510.00 each
Eligible On: PA-12 and PA-14 Series Aircraft
STC: SA4616NM (covers PA-12) SA4617NM (covers PA-14)
FAA/PMA: Supplement 1
Weight: 2.2 lbs.
Material: 4130N
Purpose: Heavy duty Cabane Vee modified for use on PA-12 and PA-14 Series Aircraft with PA-18 style landing gear installed.
Installation: Installed per Roger Borer STC SA148AL. His daughter Karen maintains his STC's. She can be reached at (907) 317-7732. An additional weld on fitting kit will be needed fo...
More
Piper Main Landing Gear Safety Cables – 6″ Extended Length
P/N: 3344A-6X (PA-12) or 3344-6X (PA-18)
Price: $232.00 per kit
Eligible On: PA-12 and PA-18 Series Aircraft
STC: N/A
FAA/PMA: N/A
Purpose: Prevents main landing gear from collapsing should a landing gear component fail.
Installation: Please see Installation Instructions. It is recommended to use new AN hardware when installing new safety cables due to bolt length.
Misc. Information: Custom fabricated lengths available upon request. Safety cables should always be replaced after a landing ...
More
PA-18-150 Tailwire Support
P/N: AD60764-02
Price: $75.00 each
Eligible On: PA-18-150 with serial numbers 18-8602 thru 18-8109013, 1809001 thru 1809057, and 1809060
STC: N/A
FAA/PMA: N/A
Material: .062 4130N
Purpose: To comply with Piper Service Bulletin 706B and Airworthy Directive 81-06-08
Installation: Please see SB 706B for installation instructions.
Misc. Information: Part fabricated in accordance with Piper Service Bulletin 706B
More
Cessna Stabilizer Trim Jack Screw Boot
P/N: U0712500-18
Price: $64.75 each
Eligible On: Cessna 180, 182 thru 182D, and 185 Series Aircraft
STC: N/A
PMA: Supplement 41
Purpose: Direct replacement for Cessna P/N 0712500-18. Covers and prevents debris from interfering with jack screws.
Installation: Installed when jack screws are removed for repair.
More
DHC-2 Hydraulic Tank (Post Mod)
P/N: ADC2US1185A
Price: $1,545.00 each
Eligible On: DHC-2 Ski Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 26 oz.
Material: 6061-T6 Aluminum
Purpose: Fuselage hydraulic reservoir for ski installations.
Installation: Same as original installation.
Misc. Information: Used on DHC-2 Post Mod 2/1328. Custom fabricated. Drawing on file at F. Atlee Dodge. Please see P/N ADC2US761A for Pre Mod 2/1328 tank.
More
DHC-2 Hydraulic Tank (Pre Mod)
P/N: ADC2US761A
Price: $1,039.75 each
Eligible On: DHC-2 Ski Aircraft
STC: N/A
FAA/PMA: N/A
Weight: 26 oz.
Material: 6061-T6 Aluminum
Purpose: Hydraulic reservoir for ski's.
Installation: Installs in wing root forward of front spar.
Misc. Information: Used on DHC-2 Pre Mod 2/1328. Custom fabricated. Drawing on file at F. Atlee Dodge. Please see P/N ADC2US1185A for Post Mod 2/1328 tank.
More
PA-12 Weld On Aft Float Fittings
P/N: 3143
Price: $885.00 per pair
Eligible On: PA-12 and PA-14 Aircraft Series
STC: SA00132SE
FAA/PMA: Supplement 11
Weight: 2 lbs. per pair
Material: 4130N Steel
Purpose: Replaces clamp on style fittings. Provides cleaner and stronger installation.
Installation: Normally accomplished at the time of re-build, however, the fabric can be removed to accommodate installation at other times.
Misc. Information: Part includes swivel block for strut and swivel wire pull tab for flying wires.
More
***MANDATORY SERVICE BULLETIN***
There was a recent mailing from the FAA to our customers who previously purchased Removable Cessna Jump Seats. Should you receive this letter please visit this link for more information.
More
DHC-3 Hydraulic Tank
P/N: ADC3S23-15
Price: $1,065.00 each
Eligible On: DHC-3
STC: N/A
FAA/PMA: N/A
Weight: 22 oz.
Material: 6061 T6 Aluminum
Purpose: Used for wheel ski installation on DHC-3 only.
Installation: To be installed at the same time as skis.
Misc. Information: Custom fabricated as per customer request. Drawing on file at F. Atlee Dodge.
More
DHC-2 Folding Center Row Seat
P/N: 3180
Price: $4,585.00 each
Eligible On: DHC-2 MK.1
STC: SA4613NM
FAA/PMA: Supplement 1
Purpose: To allow for a 3 person middle row bench seat.
Installation: Seat snaps in using standard attach brackets. Fits into original seat bases. Must have seat belt/cargo anchors installed in floor in accordance with STC SA3617NM.
Misc. Information: Bench can be split to allow for a single seat at times. You can order the bench with a single seat on the left or right. You can also choose to hav...
More
Cessna Rudder Pedal Pivot Shaft

P/N: AD1460501-21
Price: $177.50 each
Eligible On: Cessna 150A, 150B, 150C, 150D, 150E, 150F, 150G, 150H, 150J, 150K, 150L, 150M, A150K, A150L, A150M, F150F, F150G, F150H, F150J, F150K, F150L, F150M, FA150K, FA150L, FA150M, 172D, 172E, 172F, 172G, 172H, 172I, 172K, 172L, 172M, 172N, 172P, F172D, F172E, F172F, F172G, F172H, F172K, F172L, F172M, F172N, F172P, FP172D, P172D, 172RG, R172K, FR172E, FR172F, FR172G, FR172H, FR172J, FR172K, 177, 177A, 177B, 180F, 180G, 180H, 180J, 180K, 182E, 182F, 18...
More